lazylathe
reaching maximum velocity...
Found this while cruising the web today!
Looks like a rival to the HexNail just not as polished.
· AerTouch-TC v1.1 Custom
Introducing the AerTouch TC, Aerify Digital’s first touchscreen, web-enabled Proportional-Integral-Derivative (PID) based temperature control device!
Housing the brand new AerPID version 1.1 (AerifyDigital’s PID Controller Board) this device merges reliable, proven temperature control methods with modern convenience and luxury. Offering both wired and wireless internet connectivity the AerTouch’s web interface has tons to offer users. By allowing you to log on to, and control your device from anywhere you have web access (Port-Forwarding may be required) the AerTouch helps to eliminate that feeling of dread when you reach your destination and realize you left your device on at home, or allows you to start the heating process as you leave in the morning so your device is ready to go when you arrive at work.
DEVICE FEATURES
EACH AERTOUCH IS BUILT TO ORDER
AerTouch Assembly takes 2-4 Weeks!
ORDERS OPEN NOW!
All Images are of our Beta-Test Units, final product may differ slightly in appearance!
Images of every color available soon! Actual colors may vary slightly.
*Limited availability lifetime limited warranty!
Looks like a rival to the HexNail just not as polished.
· AerTouch-TC v1.1 Custom
Introducing the AerTouch TC, Aerify Digital’s first touchscreen, web-enabled Proportional-Integral-Derivative (PID) based temperature control device!
Housing the brand new AerPID version 1.1 (AerifyDigital’s PID Controller Board) this device merges reliable, proven temperature control methods with modern convenience and luxury. Offering both wired and wireless internet connectivity the AerTouch’s web interface has tons to offer users. By allowing you to log on to, and control your device from anywhere you have web access (Port-Forwarding may be required) the AerTouch helps to eliminate that feeling of dread when you reach your destination and realize you left your device on at home, or allows you to start the heating process as you leave in the morning so your device is ready to go when you arrive at work.
DEVICE FEATURES
- Thermocouple – High Accuracy Temperature Measurement
- Supported Type: K
- Temperature readings from 32° to 2000° Fahrenheit ( 0° / 1100° Celsius )
- Accuracy: ≥2.0°C ⋅ Resolution: ~0.25°C ⋅ Nominal Swing: +/- 0.8° C
- Four separate internal temperature sensors for “Cold-Point Compensation” control and calibration
- Sensor Fault Handling, Over-Temperature Detection, and other Safety Shutoffs
- Heating Element Control – Solid State Relay (SSR) Driver
- Drives Heating Element from AC Source
- Includes Coil Protection Circuitry
- Max Volts: 250v ( AC )
- Max Amps: 5A
- Max Amps with attached heat-sink: 12A
- 5-pin Female XLR Connection – Supports Most Common E-Nail Pinouts
- AC POWER
- AC POWER
- TC +
- TC –
- GROUND
- SHIELD (Earth Ground)
- Four USB ports on back – Can be used for a mouse or keyboard, or to power other separate USB devices
- Great for charging phones or mp3 players!
- Keyboard required to connect to Wi-Fi
- 10/100 Ethernet, Wi-Fi and BlueTooth Connectivity Ready
- Support for Phone App and more to be added in the future!
- Three-Inch Full Color High Resolution Touch Screen with Customizable Graphical Interface ( 320 x 240 pixels )
- Variable speed cooling fan with Air Filter – Keeps the AerTouch enclosure cool
- Automatic Safety Cool-Down with Configurable Time Frames and Delays
- Usage Detection – For applications where a temperature drop indicates the device is still in use
- Extends Safety Cool-Down
- “Bump” Feature to increase temperature by a set number of degrees for a set number of minutes
- Useful in some applications for cleaning off the heating element
- Battery Backup and Management System (Battery NOT Included)
- Dual-Source 5.1 volt Power Regulation to CPU
- Integrated Uninterruptible Power Supply
- Built-in Intelligent Battery Charger
- Monitor Battery and System voltage
- Uses a single 18650 Battery
- Configurable ambient lighting via quad channel PWM circuit
- Red, Green, Blue, & White ambient LED lighting control
- Integrated Real-Time-Clock with dedicated power backup for offline solutions
- Automated updates (disabled by default) of AerPID Control application software
- Remote system control using Web-Application:
- Control the heating element (Toggle On/Off)
- Get detailed system information
- Current Temperature
- Desired Temperature
- System Version
- System Up-time
- Change the set temperature
- Customize up to four favorite temperatures
- Configure the Proportional, Integral, and Derivative values of the device
- Change the settings used in the Use-Detection feature
- Watch your device’s heating curve in action on the temperature graph
- Schedule your device’s day – Set the device to turn on or off at specific times of day
- Open Source – Continuous Improvements
- Built with FOSS in mind; Source code will be made available post device finalization and release
- Managed Code Repository; Pull requests welcome ♥
- Lifetime Limited Warranty*
- And Possibly More!
EACH AERTOUCH IS BUILT TO ORDER
AerTouch Assembly takes 2-4 Weeks!
ORDERS OPEN NOW!
All Images are of our Beta-Test Units, final product may differ slightly in appearance!
Images of every color available soon! Actual colors may vary slightly.
*Limited availability lifetime limited warranty!
