Sponsored by

VGoodiez 420EDC
  • Welcome to VaporAsylum! Please take a moment to read our RULES and introduce yourself here.
  • Need help navigating the forum? Find out how to use our features here.
  • Did you know we have lots of smilies for you to use?

Accessories Aezhenn Wood

Hey good people! I hope you are all safe and well!

Here's some hot new pieces for the vap cap addicts!

20210923-160441-1.jpg


I made these 2 stems for a custom order:
the first one on the left is made of elm burl and blackwood , his buddy is made of old chestnut, red narra and goncalo alves.
Both are glass lined with a 8mm od tube.

The next piece is a collector one (available :naughty2:) : the storage tube and the vap cap body are made of amboyna burl, one of my favorite species... But I almost turned my last blanks in stock, and I am not sure to score the same quality the next time... :idon'tknow:
(so if you are interested, shot me a message without waiting too much...)

20210926-102012-1.jpg



20210926-102114-1.jpg



20210926-102226-1.jpg


the storage box is 11cm long, with a red narra lid and a strong magnet at the bottom.
The stem is not a glass lined one, but it fits a dynavap condenser (type M).
If you need a shorty (62mm) with class, this one is for you.

The last stem I turned today is a stabilized spalted beech one, with a touch of dyed poplar burl and a chestnut burl mouth piece...

20210927-181201-1.jpg



This is a glass lined one, who can be used with a 8mm od standard glass tube or a spiked one for better cooling...

20210927-113135-1.jpg



Take care everyone! We stay tuned!!

:wave::peace:
 
Hello good people!

First of all I would like to send my best wishes to everyone! Much love for this new year!
Let's begin it with a new stand, with some steampunk vibes...

20220126_112838[1].jpg


It is made from a red narra roots piece, with a removable abv stand in dyed ash.

20220126_111717[1].jpg


There's a special place to store a matching vapcap stem in bloodwood with some bronze inlay.
This stem is provided with the stand, it works with a stainless steel condenser (type M).
All stem with the length of a M and under 14mm od can be store here.

20220126_113204[1].jpg


20220126_112946[1].jpg


20220126_112911[1].jpg


I have two stems still available in stock too.
They are both using a 8mm od glass stem from Glass Charlie.

20220126_114849[1].jpg

Amboyna burl, purpleheart and a touch of blackwood...

20220126_114909[1].jpg


Red amboyna burl and blackwood, with bronze and turquoise inlay

I would like to propose you a 10% discount on each one (stand or stems).
It's already a long way we are sharing together in this forum and I am so thankful to our community to be still here. It gives me motivation and the will to go forward in this craftmen path. Thanks so much! :smile::peace::cheers:
 
Hey! I would like to show you my first dugout /mini stand...

20220126_115207[1].jpg


13cm x 4.5 x 2.5
Made of old oak, with dyed ash side parts and boxwood and turquoise inlays

20220126_115225[1].jpg


20220126_115243[1].jpg


There's a small magnet on each side to assure a good close. The stem hole is made for a M-type vapcap.
You will find a curly boxwood and malachite stem with this dugout.

20220126_115338[1].jpg


The stash hole in the other side is 3cm depth by a diameter of 1.8 cm

20220126_115350[1].jpg

and always a strong magnet to hold your stem :)

Do you like this kind of accessory?
 
Hello good people!
I made some new stems for one of my favorite vape of my rotation, the fury Edge from Healthyrips.
I like to use the glass stem but it's always better with a bit of wood, isnt it? :biggrin:
I asked to Glass Charlie for longer tubes than the original one and let me show you the new pieces, hot from the shop...
(Compatible with the Rogue too)

20220130_113820[1].jpg

Hondurian rosewood burl

20220130_105848[1].jpg


Curly ash

20220130_113910[1].jpg


Red amboyna burl

20220130_110005[1].jpg


Curly maple

And a family pic of all the stems in stock ;)

20220130_105526[1].jpg


20220130_105536[1].jpg


I wish you all a great day!
 
Hello good people!

I have the pleasure to collaborate with Glass Charlie for all my glass tubes. Here's a shorty vap cap stem with a spiked glass tube of his own, round edges for the lips, and direct tip fit... I like it a lot and would like to know your opinion about it...

I made for it a thuya burl sleeve, handcarved with a knife for the spiral patterns, and then I did a bronze inlay with some mother of the pearl touch...

20220228_104142[1].jpg


20220228_104339[1].jpg


Spiked tube for better cooling...

20220228_104014[1].jpg


The vc tip fits directly in for a 100% glass airpath.

20220228_103946[1].jpg


I hope you will like it, just tell me your thoughts!

I wish you all a great day!

:peace:
 
Hello good people!

I have the pleasure to collaborate with Glass Charlie for all my glass tubes. Here's a shorty vap cap stem with a spiked glass tube of his own, round edges for the lips, and direct tip fit... I like it a lot and would like to know your opinion about it...

I made for it a thuya burl sleeve, handcarved with a knife for the spiral patterns, and then I did a bronze inlay with some mother of the pearl touch...

View attachment 34304

View attachment 34305

Spiked tube for better cooling...

View attachment 34306

The vc tip fits directly in for a 100% glass airpath.

View attachment 34307

I hope you will like it, just tell me your thoughts!

I wish you all a great day!

:peace:
CIVILIZED CIVILIZATION 4-sure!
Opinion’s R like asshols’s We bipedal creature’s have at least one?
I get motivated by wooden paraphernalia 4 CANNABIS vaporizing avec espresso 2-wash down da vapor!
Decent craft 4-sure.
Excuse the excitement of love 4-wood!
 
Hello good people!

I hope you are all fine!
I have some new pieces to show you today! It was a long time I didnt made a stand with resin inclusion... So it was a real pleasure to find the way back for a couple of cuties... :naughty2:

20220321_155727[1].jpg


20220323_090057[1].jpg


20220323_090303[1].jpg


This first one was a custom order, in red amboyna burl, with two abv bowl in msasa. I like how the resin and pigments pop on the wood!

20220328_095359[1].jpg


The second one is made from a madre cacao piece, with spalted beech, resin, gold leaves and mother of the pearl inlays...
The huge abv bowl (diameter 9cm) is turned in red narra roots , with a lovely grain, and spalted beech.

20220327_110359[1].jpg



20220328_094513[1].jpg


20220328_111351[1].jpg


It reminds me a painter's palette...

8 vapcap holes and a strong magnet, enough place to install a nice collection...
This stand is looking for a new home ;)

And I will finish this post with a nice spring stem...
20220323_163017[1].jpg


Ash, mouthpiece in bloodwood satine, inlays in red narra and turquoise...

I wish you a great sunny day!
 
Hello good people!

A new stand has landed!
When I look at it, each side is a travel ... I easily imagine landscapes, planetes from outer space, or colorful fairies... Well , maybe I am going far but let's have a look at it anyway :rofl:


20220406_084346[1].jpg


A madre cacao stand, with colorful resin inlays...

20220404_164131[1].jpg


Removable abv bowl in olivewood , the flying saucer!

20220406_083529[1].jpg


20220406_083503[1].jpg


20220406_083515[1].jpg


5 vapcaps holes and a strong magnet


During all April, there will be 15% off on this stand and the big one seen in the last post.

15% off on those stems too!

20220406_161623[2].jpg


Just dm if you are interested ;)

I wish you all a great day!

:peace:
 
Hello good people,

just a few days before the end of April and the end of the Spring sales...
As there's still two stands and two stems in stock, I would like to add a special discount ... :dogpile:

If you buy a stand (with 15% off) you will have 50% off on a stem! :headbang:

Here's the pieces available:

20220425_142227[1].jpg


Don't hesitate to ask for more pics if interested ...

All the best!
:smile::peace:
 
Hey hey good people!
everyone is fine in the asylum?

Here's some a batch of vapcap stems, hot from the shop!
I hope you will like them ;)

20220914_182603[1].jpg

From left to right, let me introduce you:

- curly maple/padouk with his bronze inlays and blackwood mouthpiece

- blackwood and dyed poplar burl

-curly maple/ dyed poplar burl and a padouk mouth piece

-walnut and orange acrylic (with some grey wood parts ) and bronze inlays

All of them with their 8mm od glass tube for a better flavor;)

Some more shots for the eyes' pleasure...

20220917_111359[1].jpg


20220917_111457[1].jpg


20220917_111430[1].jpg


All of them are looking for a new home... ;)

I wish you all a great day!
 

Sponsored by

VGoodiez 420EDC
Back
Top