|
Sponsored by |
|---|
|
|
-
Need help navigating the forum? Find out how to use our features here.
-
Did you know we have lots of smilies for you to use?
Vape Dynavap
- Thread starter Dynavap
- Start date
For the BB Vapes stems is worth every penny charged.
This is the Tectonic. Be a bit before I give it a drive. I'm curious to see if this is an improvement.
I'm not a big fan of any adjustable at present. Can't completely shut the carb off. There are two of these silly adjustable carbs on the Tectonic.
Toward the end & by the mouth.
peice.
They put 3 holes in the carb adjustment ring. There is no sensible way to completely shut the carb off.
Again not used this stem yet. Using parts from the jet pack I replaced the mouth peice on the Tectonic.
Also removed one of the 2 carbs
Mom note: posts merged
This is the Tectonic. Be a bit before I give it a drive. I'm curious to see if this is an improvement.
I'm not a big fan of any adjustable at present. Can't completely shut the carb off. There are two of these silly adjustable carbs on the Tectonic.
Toward the end & by the mouth.
peice.
They put 3 holes in the carb adjustment ring. There is no sensible way to completely shut the carb off.
Again not used this stem yet. Using parts from the jet pack I replaced the mouth peice on the Tectonic.
Also removed one of the 2 carbs
Mom note: posts merged
Last edited by a moderator:
Madri-Gal
Well-Known Member
I am still trying to figure out the Jet Pack. It isn't clear how to use the various parts.
I am figuring out my Tectonic, and find they are fussier than the Shell-Shock stems. At this point I'm figuring user error, but the Shell-Shock were easy to use. There are a lot of holes in the Tectonic, but even closed it's harder to get a good draw. Again, I'm sure it's user error, but it's frustrating being stupid as well as stoned. I'm not giving up stoned, and stupid seems to be a condition I'm stuck with, so I will keep trying.
I'll try & do this with pics step by step using the Tectonic stem. This stem seems to have some different airflow dynamics.
Tectonic & Jet Pack
Next we will extend the length of the Tectonic stem by adding the 14 finned extension from the Jet Pack.
Pull your DV tip out & place 14 finned extension in its place. Then place your DV tip into finned extension from Jet View attachment 24097View attachment 24098View attachment 24099Pack
Grab the 14 finned extension. Pull your DV tip & push 14 finned extension in place of DV tip & cap. Now push DV tip into end of 14 finned extension.
Now for the important mouth peice that is our physical connection with this peice.
Find the mouth piece adapter in Jet pack kit
Now pull the 45 caliber mouth piece & insert adapter in its place
Ok now your on easy street with mouth piece adapter in place its just a simple matter of screwing in the chosen mouth piece from Jet Pack.
The mouth piece adapter is threaded. Threads go out of course to turn chosen mouth in tight.
Mardi-Gal hope this helps you. Ask questions if you need to ... Jeff
Mom note: posts merged
Tectonic & Jet Pack
Next we will extend the length of the Tectonic stem by adding the 14 finned extension from the Jet Pack.
Pull your DV tip out & place 14 finned extension in its place. Then place your DV tip into finned extension from Jet View attachment 24097View attachment 24098View attachment 24099Pack
Grab the 14 finned extension. Pull your DV tip & push 14 finned extension in place of DV tip & cap. Now push DV tip into end of 14 finned extension.
Now for the important mouth peice that is our physical connection with this peice.
Find the mouth piece adapter in Jet pack kit
Now pull the 45 caliber mouth piece & insert adapter in its place
Ok now your on easy street with mouth piece adapter in place its just a simple matter of screwing in the chosen mouth piece from Jet Pack.
The mouth piece adapter is threaded. Threads go out of course to turn chosen mouth in tight.
Mardi-Gal hope this helps you. Ask questions if you need to ... Jeff
Mom note: posts merged
Last edited:
Madri-Gal
Well-Known Member
Thank you so much, @Jeff. @Madri-Guy has the day off, and needed my help on a project, and I was delayed. Now it makes sense. I got this guy out of it.
Fingers crossed my second Jet Pack arrives soon, and I can fix up my other Tectonic. I wasn't sure how to use them, but I thought they'd look cool.
Fingers crossed my second Jet Pack arrives soon, and I can fix up my other Tectonic. I wasn't sure how to use them, but I thought they'd look cool.
Smokey McVape
Active Member
Smokey McVape
Active Member
Last edited:
Smokey McVape
Active Member
Bologna
(zombie) Woof.
Howdy, looks sweet! Might want to consider tossing that bad boy in here as well...?
Accessories - Dynavap And Other Induction Heaters
Whilst I have promised not to show anything of it's workings I am sure they won't mind me sharing pics of the unit in here, and I thought it would be a nice first real post for me. This is the same unit that @phattpiggie posted from Spannabis, I am testing it at home for a few days so I will...
vaporasylum.com
Bologna
(zombie) Woof.
I miss watching 'Peppa Pig' with the kiddos...
(or do I miss when they were kiddos...?)
but thanks for reminding me... too much fun!
EDIT:
These may be pretty close to the end product...:
Last edited:
Bologna
(zombie) Woof.
Are you guys interested in more "leaked" pics of possible upcoming models reposted from elsewhere (mods, please feel free to delete)
Posted by user: seki @ FC
Has this been posted yet? Looks like the new Ti tip.
And the new SS I assume.
Has this been posted yet? Looks like the new Ti tip.
And the new SS I assume.
Posted by user: vandalizedbythelotus @ FC
flowrolls-wholesale.com
flowrolls-wholesale.com
flowrolls-wholesale.com
DynaVap VapCap M 2021 - Wholesale Panel
DynaVap Omni Titanium 2021 - Wholesale Panel
DynaVap Vong 2021 - Wholesale Panel
Attachments
Last edited:
Madri-Gal
Well-Known Member
Don't the new Dynavap come out in March?
I like the looks of these, but that might be the drugs talking.
Bologna
(zombie) Woof.
I really have no idea when release dates are... I imagine a bit before 4/20 tho...
I edited my post above if you (or anyone else) are interested in purchasing the new models wholesale...?
(And to all: I go back and edit my posts constantly and unashamedly if you haven't noticed... often with no "edit" note at all...
)
Last edited:
|
Sponsored by |
|---|
|
|
|