Sponsored by

VGoodiez 420EDC
  • Welcome to VaporAsylum! Please take a moment to read our RULES and introduce yourself here.
  • Need help navigating the forum? Find out how to use our features here.
  • Did you know we have lots of smilies for you to use?

Vape Ispire DAAB

My first polished sic had a piece chip off early on
I contacted jcvap and they replaced it immediately - unfortunately they sent a Carta sic dish
I contacted again and they sent me a polished og peak dish undamaged

The chipped broken dish works fine, once set up in place with ss sleeve it all holds in place and doesn't fall out when cleaning

So now I have two sic Carta dishes and two polished og peak dishes

If anyone needs a Carta sic dish I'll pass it on cheap lol

Jcvap are excellent to deal with and honour purchases over time

Sourcemore sent the replacement bubbler which is a perfect fit too
So they are also amazing at CS
They have always replaced any item without issue
Send pics/vid of proof and they sent a new piece immediately

Both have been easy to communicate with and go out if their way to accommodate customers

Plus the excellent prices and member rewards systems they have for loyal customers

Polished sic Daab kicks bum and is super easy to clean back to shiny new
Full surround metal sleeve and washer underneath
600 and then a full manual reheat and the dab is done in one tasty hit

800 and a full manual for feco

Carta being smaller only takes a one time 250 heat but I prefer the bigger dish and polished
Uses more battery, but easier to clean and better quality vapour
IMG20220714205022.jpg
IMG20220714205120.jpg
IMG20220721013744.jpg
IMG20220721013842.jpg
IMG20220721013713.jpg
 
Bought some silicone orings from Ali
Cheap as piss and work a treat
2mm thickness and 33mm diameter (3mm would work well too)
Fits perfectly on the Daab bubbler here and gives a perfect airtight seal against the reclaim cup for better vapour production
Nice little upgrade - nowhere near heat or actual airpath, just stops air slipping in the glass gaps, but it's food grade high temp silicone anyway
10 for $1.32aud delivered

AU $1.09 20%OFF | 10pcs Thickness 2/2.4/3/4mm White Rubber Seal Ring OD 5-80mm Heat-Resistant Food Grade Silicone O-Ring

IMG20220820002536.jpg
IMG20220820002541.jpg
IMG20220820002633.jpg
IMG20220820002653.jpg
IMG20220820002804.jpg
 
Bought some silicone orings from Ali
Cheap as piss and work a treat
2mm thickness and 33mm diameter (3mm would work well too)
Fits perfectly on the Daab bubbler here and gives a perfect airtight seal against the reclaim cup for better vapour production
Nice little upgrade - nowhere near heat or actual airpath, just stops air slipping in the glass gaps, but it's food grade high temp silicone anyway
10 for $1.32aud delivered

AU $1.09 20%OFF | 10pcs Thickness 2/2.4/3/4mm White Rubber Seal Ring OD 5-80mm Heat-Resistant Food Grade Silicone O-Ring

View attachment 39300View attachment 39301View attachment 39302View attachment 39303View attachment 39304
Does the black silicon armor/heat shield still fit on the reclaim cup with the o-ring installed on the bubbler?
 
I need all the bumper protection I can get, I was disappointed when my extra reclaim cup did not come with it.
edit...ordered!
 
The 2mm I ordered are still many weeks away!
 
Hit the Daab dry by accident tonight
Will be doing it all the time from now on
With polished sic mod it is smooth af and the taste and hit was amazing
No water to rob the flavour or goodies

Might be a bit chirpy with the og quartz cups, don't know haven't tried
But with polished sic it hits nice, and hard too

Daab sans water for me from now on
Easier to keep clean and no bits growing in the water plus more vapour in my lungs....kind of more portable too I guess
 
I have had the DAAB w/SiC the last couple of days while my PID is running my ball vape (I do have 2xPID controllers but it seems like a lot of power usage having both turned on all day).
I do like how the DAAB (or Dablamp) can almost replace my DNail without power being wasted by sitting on standby all day.
Even better, I charge all my portable vapes (and run 2x Ed's TNT) from my solar garden pond/waterfall.
I doubt I will use the DAAB quartz again as SiC is so much easier to clean...one great mod for sure.
I might have to try an anhydrous hit on the DAAB now myself!
 
I have had the DAAB w/SiC the last couple of days while my PID is running my ball vape (I do have 2xPID controllers but it seems like a lot of power usage having both turned on all day).
I do like how the DAAB (or Dablamp) can almost replace my DNail without power being wasted by sitting on standby all day.
Even better, I charge all my portable vapes (and run 2x Ed's TNT) from my solar garden pond/waterfall.
I doubt I will use the DAAB quartz again as SiC is so much easier to clean...one great mod for sure.
I might have to try an anhydrous hit on the DAAB now myself!
I won't ever use the quartz cups either
I have two polished sic dishes set up in two reclaim cups
One for rosin and one for feco
Super easy clean and full sized dish
Dry Daab is the goods - flavour and hit
 
Reclaim cup fits in the wand perfect
Don't know why you'd need to but if for some reason you did - hold the wand in one hand the bubbler in the other and away you go lol
EDIT
Tbh you could probably work out something smaller to go over the top and this might be a more portable set up
I already hit the Daab dry
Mmmm.... I might look at covers/bowls/pipes/glass funnels etc to hold on top
IMG20220930005518.jpg
IMG20220930005513.jpg
 
Okay youz guys, After Reading about the DAAB I gave in to VAS and purchased a Daab by Inspire.
HAVE not used concentrates ever. So I ordered rosin from my MMdispensary..
The rosin does not look like the “pics” I have seen. And the videos I have seen , is green and hard to handle .
-VAS,bought a “hot-knife And a Dab Pen which I thought can come in handy with this hard-to-handle rosin.
I hope to get rosin in the future that looks more like the Rosins posted.
At $180 US/ gram is not inexpensive.
looking forward to “New Adventures” shortly with the Inspire DAAB. THE Shop I purchased from had the Northern Lights version,
The Honeycomb version- Was Out Of Stock-the one I wanted, and the OG Black.
So sad for being out of the HoneycombVersion.
on the other hand-New Experiences to look forward to. Cheers to All !
 
green and hard to handle
Well that doesnt sound like any rosin iv ever pressed or seen ??
Anyone else seen green rosin ? Sounds bad.. trichomes are not green.. they are clear/amber.. there must be lots of plant material in your rosin... like lots..

At $180 US/ gram is not inexpensive.
Surely not.. 180 a gram ??? Not even dmt costs that much..

At that price and quality.. id say you will probably get better rosin with some cheap hair straighteners and a clamp...
 
Well that doesnt sound like any rosin iv ever pressed or seen ??
Anyone else seen green rosin ? Sounds bad.. trichomes are not green.. they are clear/amber.. there must be lots of plant material in your rosin... like lots..


Surely not.. 180 a gram ??? Not even dmt costs that much..

At that price and quality.. id say you will probably get better rosin with some cheap hair straighteners and a clamp...
$200 a gram in these parts mate
Especially for rosin not distillate
Illegal country


Never ever seen green rosin though
Not sure what that would be really unless lots of chlorophyll
 
$200 a gram in these parts mate
Holy shit.. thats insane..

Somebody somewhere is making a fuckton of money...
I pay on average 100 for a 3.5... and im in an illegal country..
 
Holy shit.. thats insane..

Somebody somewhere is making a fuckton of money...
I pay on average 100 for a 3.5... and im in an illegal country
Im hoping for more palatable prices from State-Run Dispensaries.
Someone I know told me he pays 40/g. usd in Florida legal dispensary.
Here in Louis y Ana ( spelled in Spanish )there is a high imposed tax on Medical MJ.from State Sponsored
Legal Dispensary(-ies.)
Love the Honeycomb version of the Daab by Inspire, it was sold out so I settled for the Northern Lights version.
AND at these prices it may collect some dust before using it. col and lol .
3D35FCDF-392A-4B1E-BD46-094C8C614B92.jpg
l
 
Last edited:
Holy shit.. thats insane..

Somebody somewhere is making a fuckton of money...
I pay on average 100 for a 3.5... and im in an illegal country..
$100 for 3.5 of rosin ?
Shit some people pay more than that in America

Is that black market or medicinal
And do you know the source and process it was made?
Is it distillate not rosin?
And then is it purged well?
 

Sponsored by

VGoodiez 420EDC
Back
Top