Vapor Asylum Members and NewComers
Wanted to take a minute to thank you for reading on. The first post in this thread, I've decided to briefly introduce myself, explain what the goal of a DDave Mod Kit is, and announce the arrival of the latest pieces which I've added to the kits I make available on www.DDaveMods.com. There's also a Spoiler button below so you can see the very first announcement of the DDave Mod Kits. Remember, the kits have grown and matured since the original announcement... but that announcement has a lot of valuable information within.
First off, who am I?
A vaper, just like many of you. Using MMJ for both medical and recreational purposes. And most importantly, always wondering how things can be made better!
What is the goal of a DDave Mod Kit for a specific vaporizer?
To improve one or more of the facets of your vaporizing sessions.
* Performance - to make your vaporizer capable of more powerful extractions (think clouds)
* Economy - To extract efficiently and completely. Many claim greater effects from less herbs. (I am one who has experienced this)
* Variety - Looking for performance one day, slow flavor sipping the next. Some kits give 4 or more vape signatures to your one vaporizer. Like owning 4 different vapes!
* Ease of use - Sometimes you sit back and think, this could be easier to use, or simpler to load herb or clean. (I think that way as well)
And finally, what is V3?
In simplest explanatory form, V3 is the removal of the need for metal basket screens. Don't sweat those baskets though... V3 kits come with all the pieces from the latest V2 kits, plus the new V3 pieces.
In complex form, this mod changes many of the parameters that exist within the oven section of the combined pieces. It more than doubles the possible hot air paths through your herb. It improves extractions and boosts Flavor!
The Concentraton Chamber of V3 is made by combining the 14mm Basketless Stem with the Glass Filter basket. Then a keck clip holds the two pieces together. Great for vaping dry herb (medium to course grind). Great for vaping concentrates on your choice of cotton, hemp fiber, or a bed of herbs.
Many prototypes were created and tested in a effort to get the best extractions...
V3 Picture Gallery and Write Up
For latest Kits and announcements, plus a lot of other info, visit www.DDaveMods.com.
Introduction:
A few have noticed that I recently received Accessory Maker status here at FC. Have watched many try to obtain pieces of the DDave mod or other accessories for their Arizer Desktop Vapes. Have also seen some receive incorrect parts. Frustrating? So, I decided to put together a kit of all the most common parts and offer them on eBay. Will list 10 kits at a time and when those are gone, will list 10 more as soon as possible.
Opening this thread, so as not to clog the Arizer EQ or VTower Thread and to allow a place to discuss the DDave Mods.... and improvements (always open to kit changes or mods to the mod).
What is the DDave Mod?
A 18mm-18mm F/F adapter that replaces the stock Cyclone Bowl. Complete with its own 18mm wand. Brings your herbs closer to the heater of the Arizer tower vapes and has a more open air path than the original adapter. Note, the DDave Adapter included in this kit is not the original DDave Adapter, it's shorter yet, bringing your herbs even closer to the heating element. Note: The pieces of the mod are custom. They do not work with wands or elbow screens from the DDave Mod V1.
What is the DDave Mini Mod?
A 14mm-18mm F/F adapter that replaces the stock Cyclone Bowl. Complete with its own 14mm wand. With this configuration, the Arizer towers can efficiently extract from much smaller quantities of herbs... Single hit extractions are very possible. Note: The pieces of the mod are custom. Since there was no DDave Mini Mod V1, no changes to note.
What's different in the latest Mod revision?
The latest revision of the mod changes the wand and method of extraction. The wands included in the kit do not accommodate the center screen. This was defeating the purpose of bringing the herbs as close to the heater as possible. Now, there are two methods of use. Power Mode and Standard. In power mode, the wand is packed in the same fashion as the famous "elbow pack". In standard mode, load your herbs into the F/F adapter, then insert the wand.
So what's in the DDave Mod Kit?
(Glad you asked.)
The kit includes:
And where can I find this kit?
The kit will be listed on my website. Latest link will appear in my signature.
Will make best effort to watch for postings to this thread and answer all questions/concerns in a timely manner. Feel free to post here regarding the mods. Also, my PM is always open.
Pictures?
See www.ddavemods.com link for latest pictures of the kit.
Welcome to the thread...and Vape On!
A few have noticed that I recently received Accessory Maker status here at FC. Have watched many try to obtain pieces of the DDave mod or other accessories for their Arizer Desktop Vapes. Have also seen some receive incorrect parts. Frustrating? So, I decided to put together a kit of all the most common parts and offer them on eBay. Will list 10 kits at a time and when those are gone, will list 10 more as soon as possible.
Opening this thread, so as not to clog the Arizer EQ or VTower Thread and to allow a place to discuss the DDave Mods.... and improvements (always open to kit changes or mods to the mod).
What is the DDave Mod?
A 18mm-18mm F/F adapter that replaces the stock Cyclone Bowl. Complete with its own 18mm wand. Brings your herbs closer to the heater of the Arizer tower vapes and has a more open air path than the original adapter. Note, the DDave Adapter included in this kit is not the original DDave Adapter, it's shorter yet, bringing your herbs even closer to the heating element. Note: The pieces of the mod are custom. They do not work with wands or elbow screens from the DDave Mod V1.
What is the DDave Mini Mod?
A 14mm-18mm F/F adapter that replaces the stock Cyclone Bowl. Complete with its own 14mm wand. With this configuration, the Arizer towers can efficiently extract from much smaller quantities of herbs... Single hit extractions are very possible. Note: The pieces of the mod are custom. Since there was no DDave Mini Mod V1, no changes to note.
What's different in the latest Mod revision?
The latest revision of the mod changes the wand and method of extraction. The wands included in the kit do not accommodate the center screen. This was defeating the purpose of bringing the herbs as close to the heater as possible. Now, there are two methods of use. Power Mode and Standard. In power mode, the wand is packed in the same fashion as the famous "elbow pack". In standard mode, load your herbs into the F/F adapter, then insert the wand.
So what's in the DDave Mod Kit?
(Glad you asked.)
The kit includes:
- The Original DDave Adapter - 18mm to 18mm F/F that holds a screen + 2 ss screens.
- An 18mm Clear Borosilicate glass wand + 3 tip basket SS screens
- The DDave Mini Adapter - 14mm to 18mm F/F adapter that holds a screen + 2 ss screens.
- An 14mm Clear Borosilicate glass wand + 3 tip basket SS screens
- A test tube clamp - the perfect holder for a hot adapter!
- Two Silicone Whip Tubes - 2.5 feet long each
- Free Wood block adapter holder - untreated, holds hot adapters & wands
- Two additional Tall DDave Adapters - both 18mm & 14mm. (Tall, comparable to OEM Cyclone Bowl, for lighter sessions).
And where can I find this kit?
The kit will be listed on my website. Latest link will appear in my signature.
Will make best effort to watch for postings to this thread and answer all questions/concerns in a timely manner. Feel free to post here regarding the mods. Also, my PM is always open.
Pictures?
See www.ddavemods.com link for latest pictures of the kit.
Welcome to the thread...and Vape On!
So let the games begin!
Last edited: