Sponsored by
VGoodiez 420EDC
  • Welcome to VaporAsylum! Please take a moment to read our RULES and introduce yourself here.
  • Need help navigating the forum? Find out how to use our features here.
  • Did you know we have lots of smilies for you to use?

Vape Mighty by Storz & Bickel

Fat Freddy said:
Or am I misunderstanding something?
Click to expand...
Yep, misunderstanding, more goodies are boiled off at once at the higher temp for even thicker clouds, I start at 385 myself and step up as vapor diminishes, right to 410 (native mouthpiece) always flat out if on a bong.

Edit; And yes, @Stevenski is a savage!
Extra edit; DOH!, what @felvapes says below...
 
Last edited:
Fat Freddy said:
You actually get "thickest and heaviest vapor"
at a temp of 210? :thinker:

Or am I misunderstanding something?

,

.
Click to expand...
210°C not °f if this is what you are confused by
210c is 410f

LesPlenty said:
Yep, misunderstanding, more goodies are boiled off at once at the higher temp for even thicker clouds, I start at 385 myself and step up as vapor diminishes, right to 410 (native mouthpiece) always flat out if on a bong.

Edit; And yes, @Stevenski is a savage!
Click to expand...
I think it was the Celsius/farenheit difference was the confusion


I start on 360 these days and then finish at 410

I used to start and finish at 410 but now enjoy the taste down low and then the hits up high
 
Moses Baca said:
Yeah, I can see that. I've only been in the vaping world since last December so I've got a ways to go.
Click to expand...
I have been at it for about 18 months nearly
I know how you are feeling ATM...
Smoking sucked but all the options were the same smoke.....lol
Rosin is helping my vas settle
I dose less often because of it and thus am looking for less devices to play with
Vas is still there though....lol

I will say my mighty is a DD still and I don't vape herb nearly as much currently
 
felvapes said:
210°C not °f if this is what you are confused by
210c is 410f


I think it was the Celsius/farenheit difference was the confusion


I start on 360 these days and then finish at 410

I used to start and finish at 410 but now enjoy the taste down low and then the hits up high
Click to expand...


Yepper, I'm a Fahrenheit 'merican . :myday:

I too temp step from 360 to up around 400...Fahrenheit that is! :rofl:

And as a general comment on VAS, if some of you believe you may only have a little bit of VAS at this point then please understand that saying that is like your woman telling you she may be just a little bit pregnant. :thinker::thinker:
 
Last edited:
I did a clean of all my various tips and MPs today
The mighty got it's clean too

Except i decided to change the seals for the first time too
The little blue one inside the mp locking part was a bit loose and I remembered @Stevenski mentioned he did his a while back

I thought it's been long enough why not

I should have took pics but didn't
There was a noticeable difference in size and colour between old and new seals
Definitely weathered
I changed them all

Upon changing the mp screws on tighter with a more satisfying close/lock
And there is a noticeable improvement in performance and flavour strangely enough
Not that it tasted bad before, but it was better quality vapour all round I found

As I remember @Stevenski saying when he did his, if you haven't given your Mighty a service in a while I recommend doing so
It will love you back in return....
 
felvapes said:
I did a clean of all my various tips and MPs today
The mighty got it's clean too

Except i decided to change the seals for the first time too
The little blue one inside the mp locking part was a bit loose and I remembered @Stevenski mentioned he did his a while back

I thought it's been long enough why not

I should have took pics but didn't
There was a noticeable difference in size and colour between old and new seals
Definitely weathered
I changed them all

Upon changing the mp screws on tighter with a more satisfying close/lock
And there is a noticeable improvement in performance and flavour strangely enough
Not that it tasted bad before, but it was better quality vapour all round I found

As I remember @Stevenski saying when he did his, if you haven't given your Mighty a service in a while I recommend doing so
It will love you back in return....
Click to expand...

Mine seems to chew up those blue o rings near the locking mechanism. The other o rings seem to last forever.
 
Shredder said:
Mine seems to chew up those blue o rings near the locking mechanism. The other o rings seem to last forever.
Click to expand...
I thought the others were lasting
But sisde by side next to old ones and you can see the difference
Also on using there is a difference
The big blue one on the mighty body made a difference in locking close as did the little blue locking one inside MP
I didn't think I needed to do them, bit there is definitely an improvement in performance all round since doing so
 
Lube your o-rings (Ed's Butter, Dynavap lube, beeswax, butter, KY Gel, you get the picture) and they will last forever... well, a lot longer anyway!
 
LesPlenty said:
Lube your o-rings (Ed's Butter, Dynavap lube, beeswax, butter, KY Gel, you get the picture) and they will last forever... well, a lot longer anyway!
Click to expand...
I do this
Why I waited so long to do the change after reading @Stevenski post a while back
But changing them has done heaps more than expected
The heat must affect these ones more than the dv ones etc
Definitely a better performance and vapour quality since swapping gaskets
 
Just suggesting as some may not know to use lube, I rarely use the native CU anyway.
 
To be totally honest, I rarely use my Mighty, too many better options, handy to have when out and about though (I rarely go out)
 
You must log in or register to reply here.

Sponsored by
VGoodiez 420EDC
Back
Top