Sponsored by
VGoodiez 420EDC
  • Welcome to VaporAsylum! Please take a moment to read our RULES and introduce yourself here.
  • Need help navigating the forum? Find out how to use our features here.
  • Did you know we have lots of smilies for you to use?

Vape SHOW US YOUR BALLS - Ball vapes - user experience and comparisons

Tincandtoke said:
Do you think the two glass pieces in my post would work well?
Click to expand...
Not sure, all I know is that tightening or loosening after the coil has been used one way for a while is one way to prematurely wear it out.
@felvapes has more experience with fitting coils to non-standard surfaces and may chip in with more help.
 
LesPlenty said:
I think he has the B0 in the video I linked, the cheap version but better for just herb without dabs?
Click to expand...
B2 and Taroma still hit harder/more couch lock

B0/Taroma lite give a nice hard head buzz - but it wears off quicker

I would go with a 20mm coil on the glass piece @Tincandtoke
Although I have recently bought a lab glass joint I will try as an injector and let you all know once I've made it

Not sure if the glass injector or the over the top f/f version will be best
The lab glass though should be safer and not suffer thermal shock at all
 
LesPlenty said:
Not sure, all I know is that tightening or loosening after the coil has been used one way for a while is one way to prematurely wear it out.
Click to expand...
Coils wear out ???
I have adjusted mine since using them and now worried... are they only to be adjusted from new ???
 
Kellya86 said:
Coils wear out ???
I have adjusted mine since using them and now worried... are they only to be adjusted from new ???
Click to expand...
It's okay to adjust them a bit
But over fucking with them can weaken the thin wires inside and lower their life span
But the one on my glass one pictured above somewhere i had to do lots of wrangling to get it to fit
It still works fine but I probably shortened it's life a bit doing so

Shane always trys to sell more goods by saying you need to replace them each year
I bought mine from him and Auber four years ago at least - absolutely fine and still working and I left the dnail one on for many hours at a time over those four years

So they last a lot longer than a seller will tell you
And can take a reasonable amount of wrangling
But the more you bend them around the more the thin wires are being put under strain

Like bending any wire back and forth till it breaks
 
Last edited:
felvapes said:
It's okay to adjust them a bit
But over fucking with them can weaken the thin wires inside and lower their life span
But the one on my glass one pictured above somewhere inhad tondo lots of wrangling to get it to fit
It still works fine but I probably shortened it's life a bit doing so

Shane always trys to sell more goods by saying you need to replace them each year
I bought mine from him and Auber four years ago at least - absolutely fine and still working and I left the dnail one on for many hours at a time over those four years

So they last a lot longer than a seller will tell you
And can take a reasonable amount of wrangling
But the more you bend them around the more the thin wires are being put under strain

Like bending any wire back and forth till it breaks
Click to expand...
Ahh ok makes sense.. i only very slighty adjusted mine..
 
I don't think I'm going to be able to DIY a ball vape
A tear down and tune up on the snow blower left my hands aching
Had a lot of problems with the fiddly parts like getting the screws back in place
Breakage is likely with anything glass pieces I handle
So is the flower pot worth it or maybe a freight train?

Are there holiday sales coming up?
 
I picked the B0 fromVGoodiEZ . Curated. No fumbling and re-reading, or possibly breaking glass( bought the CH ShovelHead 14mm male Kit.). or breaking the coil Setting up.
I like that alone.m
plug and go in the Description.
may be the Last One I buy.…
…..Until the LegacyPro-TM2-Angus-Mighty Plus-DynaVap cordless charging and Portable Comes Out for Vapers.
Troy and Jerry mentioned the DC Bzero on my Second viewing of the streaming broadcast on Twitch!
 
Last edited:
Tincandtoke said:
I don't think I'm going to be able to DIY a ball vape
A tear down and tune up on the snow blower left my hands aching
Had a lot of problems with the fiddly parts like getting the screws back in place
Breakage is likely with anything glass pieces I handle
So is the flower pot worth it or maybe a freight train?

Are there holiday sales coming up?
Click to expand...
Bc2vape have a Ti head that works $90aud
They have a ceramic head that works $29 aud
They are your cheapest options
B0 or Taroma lite are good but cost more
Flower pot is not balls so get a B series if going ch
Freight train is good and there is a TKO
One of those two just brought out a new version
 
I'll probably go flower pot b2 for a bit of redundancy with my 710 coil
Flower vape that can get a concentrate use in an emergency
I'll get the auber PID option which will give me flexibility if I have successful surgery on my hand
May still try a ball vape with Oregon glass blower and a 20mm coil from 710

I love my cat but she constantly bites holes in my vape bag
Good thing I use the old chamber, the new pre made vape bags suck and cost big $$$$

Maybe one day someone will actual get information from users and actually incorporate some of the ideas
Cannot believe S&B paid someone to design that filling chamber
And how did it make it past development and testing?

Can you vape flower using a torch?

IMG_20221114_121959.jpg

The concentrate haul from Maine
6 grams of different live resin and a terpenes sauce for some diamonds I have left
About a 3 month supply, trates toss me out the door into the gutter
Curious how the b2 will perform with live resin
 
Tincandtoke said:
I'll probably go flower pot b2 for a bit of redundancy with my 710 coil
Flower vape that can get a concentrate use in an emergency
I'll get the auber PID option which will give me flexibility if I have successful surgery on my hand
May still try a ball vape with Oregon glass blower and a 20mm coil from 710

I love my cat but she constantly bites holes in my vape bag
Good thing I use the old chamber, the new pre made vape bags suck and cost big $$$$

Maybe one day someone will actual get information from users and actually incorporate some of the ideas
Cannot believe S&B paid someone to design that filling chamber
And how did it make it past development and testing?

Can you vape flower using a torch?

View attachment 42085

The concentrate haul from Maine
6 grams of different live resin and a terpenes sauce for some diamonds I have left
About a 3 month supply, trates toss me out the door into the gutter
Curious how the b2 will perform with live resin
Click to expand...
Your 20mm barrel coil will fit any baller
The 710 does not only work with the B2
 
I just got my 200x3mm synthetic rubies and found that my B2C head holds over 200...about 210 so the first natural agate set must have been well over 200 in the pack as I counted the leftovers (30) to come up with my initial 170 counts.
 
felvapes said:
Your 20mm barrel coil will fit any baller
The 710 does not only work with the B2
Click to expand...

I have a dual PID from 710 for any additional 710 coils

I was going to get the auber to give me more flexibility in ordering
Being able to order coils from 2 different places gives me options if supply becomes a problem
I meant to say ordering the 20mm coil from auber instead of 710


I hit Maine and got some serious high test fuel so my posting is shit
 
Tincandtoke said:
I have a dual PID from 710 for any additional 710 coils

I was going to get the auber to give me more flexibility in ordering
Click to expand...
I think they have the same Pin out so use the same coils.
 
LesPlenty said:
I think they have the same Pin out so use the same coils.
Click to expand...

That would be nice
I've been thinking of getting an auber for travel to these insane cannabis festivals
The 3-d printed box from 710 is kind of flimsy and does not travel well
I break out the power unit with the solar panels and plug in
Cannabis Festival is no place for portable vapes, it'll kill them
Set up and you get trashed for free and get to sample some products before you buy
These folks dab a gram or more at a time
Jars of resin they call baller jars, 14-28 grams
Get a camping pass and set up by the entrance in a spot with some sun
Put out your vapes like bait and sit back and be patient and quiet

35f (1.5c) and raining
GMO or cream pie tonight
Very high thc
 
You must log in or register to reply here.

Sponsored by
VGoodiez 420EDC
Back
Top