Vape Dynavap

[phattpiggie]

@InterplanetaryTanner follow the course @Dynavap has laid out with the VC. Modular design.
If the finned portion could take both types of magnet you could offer both.
This would also allow for variations on a theme.
From your KISS design to a bigger tray style thing with recess for a grinder and/or storage jars.
A few options all using the same magnet adapter.

 

[InterplanetaryTanner]

I should make an ID thread here

 

[Hogni]

Nice idea, but why not offer different versions? Would like to see one as describd by pp.

Yesterday I finally got my Skeletor from Pipes (and the PS for a friend) and... I love it!

Ir's so cool lying in the bed, the Skeletor on the bed table, take your VC reaching it with one hand to the Skeletor, plug it in, a light pressure and five sec later you have your VC heated to operating temp - awesome! One of the best gadgets for the VC I know and I think I know them nearly all.

Yesterday I got my @ddave VapCap Vapor Cooler V3 too.
You can use it with water but Dave recommends to use it dry for saving flavour. So I did. Have tried my VCs in different combinations with glass, stems, water pieces. There are a lot of nice, useful and tasty ways but I've never got such smooth and TASTY hits by any other device with the VC. It's so lovely - another level of enjoying my VCs!
(BTW it delivers the same performance when using it with the GH. Especially the PFE is fitting perfectely and your GH vape will be so cool and tasty, you can't imagine....yummy!!)

BTW for those who still don't know it: on FC I have this link to my Pinterest VC Pinboard in my signature.

There I've sampled the best pics of the FC VC thread and for sure the best - means nearly all - pics of @phattpiggie's VC art and sopisticated sense of style.

Hope you enjoy!

 

[dorkus_molorkus]

Well ive had an 'M' for a few days now & shit went down like this.

Im not a fan of torched based vapes cause I burn my shit. Jezz Id burn my shit with log vapes on a semi regular basis, let alone when Im wielding a mighty flame of destruction in search of vapor nirvana.

Why is that you ask?

Cause I like my vapor like my women..................

Hot, fast and easy.

and just like my experiences with women, it was a bit rocky going at first, then I found the right appliance to plug her into to get her really pumping.

I whacked that bitch into a hydratube, blocked that annoying as fuck choke hole & I cooked a tiny little nub to with in an inch of its life & white walled my piece then and there.

"respect the click?'' Fuck that shit, I havent got time to wait for clicks and clacks.
I blaze the shit out of that sucker & I use the click as a guide for when to start counting.
Depending on the load, Im stopping the burn anywhere from 5-7 seconds AFTER the click.
This truly is a case of ' No' means ' yes', heat her up, grab her by the pussy & hit it like a 2 dollar hooker.

Sure, im not going to tell you I dont on occasion get combustion & yes, it sucks mighty balls.
But Im jamming 6 or seven hot as fuck, white walling one hitter quitters in less than 10mins.

Triggered, I mean toasted like a boss.

 

[little miss deadly]

I have an M coming.thank You George.

My current dynavap favourite is a beautiful cocobolo double crown.
George and Dynavap have been professional and a pleasure to deal with throughout.

I also love my @Pipes induction heater too.It works flawlessly and has replaced my lighter 90% of the time.

 

[GreenHopper]

I have an M coming.thank You George.

My current dynavap favourite is a beautiful cocobolo double crown.
George and Dynavap have been professional and a pleasure to deal with throughout.

I also love my @Pipes induction heater too.It works flawlessly and has replaced my lighter 90% of the time.

Sounds like a nice setup

Lately I've been recommending new users go for an M with a dual flame lighter and a @Pipes plugin heater.

I think that is the best starter kit you can get for about $120 and it will wipe the floor with not only other vapes in the same price range but considerably more expensive units too.

 

[turk]

....started with the omni....I will forever be spoiled...haven't used a m...untill the 4 i bought arrive....

 

[Cuckfumbustion]

Took my 2 'M's and a Vapium Summit for a two day bike ride out of town. My fav windproof lighter is a double torch designed for relighting cigars. One click and the lid pops open and the twin jets rip.
It has a mirror built in the lid for those who want to relight their stogies with sustained heat. But isn't that kinda what you are doing with a VC? See my logic here. So look at those type of lighters if you are in search of the ideal torch as a possibility.

The single torch was good when I wanted more cloud/flavor action. While the twins were good for click to click sessions. Plus the 'M' probably retains it's heat more than the Ti I figure. The Ti being quick to heat and cool down. That is the trade off.

 

[turk]

...I really enjoy my single torch whip-it...it's my favorite.

 

[Sixstringsmash]

Some sad new: I was cleaning one of my older generation vapcaps earlier today when I accidentally dropped that little metal O-ring that you would use to clamp down the screen and lost it(me thinks it went right down the kitchen drain!). Woe is me. Even worse was that it didn't seem like the part was sold on the Dynavap site anymore since it's an older generation tip.

Some happy news: I called the support phone number from the website and got connected very quickly with Mr. George. I explained my situation to him and he informed me that they no longer sell that replacement part. After about a two second pause, he continued to say BUT we will give them to you. So after some talking I got off the phone and sent him an email with my information and he is going to send out some replacement metal o-rings to me free of charge

I know you guys have probably heard me say this before but man the level of service that George and @Dynavap provide is beyond expectation and I just wanted to thank them again for their stellar service on the forums here.

 

[momofthegoons]

I know you guys have probably heard me say this before but man the level of service that George and @Dynavap provide is beyond expectation and I just wanted to thank them again for their stellar service on the forums here.

They are the bomb diggity!!!

 

[phattpiggie]

This has been the best year I've had and it's all down to @Dynavap and the people who've supported me in all this.
There's a new round of orders being taken and in a fortnight or so I'll know just what's coming this time.
List info is here
http://vaporasylum.com/threads/phattpiggies-wood-shed.76/page-4#post-7828
Here's a bit of M and Induction Porn for you.


Many, many thanks to everyone who's helped make my first year a fantastic one.

 

[momofthegoons]

Holy shit @phattpiggie you are a fucking fog machine with that induction heater/dynavap/phatpiggiefabulously-cool-stem combo!

 

[little miss deadly]

Yummy,my M and Portside arrived

@Pipes Your induction heater,Its a thing of beauty and so solidly constructed,it could easily have come off a store shelf.

It was so simple to charge and operate.Install batteries.charge with the supplied charger.check the battery meter which is cute.instant rips in 8 seconds from cold.

how i like it

My battery pack 3 x sony vtc4 will keep me going for a week or so.

I added some foam non slip feet and a few dynavap magnets I purchased in the recent DV sale.

Oh and that sticker fits perfectly @Dynavap

I can' recommend the portside enough.

Love my new Vapcap M.I was concerned initially that the stainless M flavour profile would be lesser than the TI Vapcap.how wrong I was.flavour is on point.
I now prefer the M vapor profile

The M would make a perfect introduction to vaping or a a welcome addition to any Vape collection..thanks again @Dynavap

 

[momofthegoons]

@little miss deadly you've got a nice little set up there.

Makes me all the more anxious to get my Skeletor from Pipes and have phattpiggie make an enclosure for it and...... it'll be rock n roll time

 

[little miss deadly]

Thanks Mom.You will love your Skeletor with the VapcapAdd a little bubbler from your collection and it makes for a kickass flower/oil dab rig.how i feel about it

I think @Dynavap already own a jarhead and like it.

@phattpiggie those stems though...best of luck in youre future.

 

[momofthegoons]

Well now... look what landed.

Lmao.... I think it gets it's super power from the Tic Tacs.... Gotta love our mad scientists....
Thanks @Pipes I can't wait to put this baby through the paces.

And @phattpiggie put your thinking cap on and start saving those scraps for realz!!!! Cause I'm counting on you to make me a little something something to house this masterpiece in.

 

[Hogni]

Mom, congrats! Yepp, the Tic Tacs are nearly the best.

 

[phattpiggie]

@momofthegoons mine arrived on Weds, fast as...

How are you liking it so far??

And as far as enclosures you don't get away that easy, a brief would good, even a very brief brief would be nice.

 

[momofthegoons]

How are you liking it so far??

And as far as enclosures you don't get away that easy, a brief would good, even a very brief brief would be nice.

To be completely honest I haven't had a chance to try it yet. I've been sick with a cold and haven't wanted to do much vaping. But as soon as I'm a bit better it's getting a full work out.

And.... come now.... a brief? Unless you meant...

I would never dream of telling an artist how to make something. Now... you know how I roll and the types of wood I like. And what kinds you've got. I am more than sure with your imagination and talent you will come up with better ideas than I ever would.