Accessories Phattpiggies Wood Shed

[phattpiggie]

My thoughts exactly @Squiby, how?
August to Xmas is a long time, shit I get jittery with a 3 week delivery from China.

Thank you for the lovely pictures @Moses Baca, and I'm glad you're both enjoying them.

Nearly there on the workshop extension. Can't get in there until its done.

 

[phattpiggie]

Workshop is all sealed back up and whilst I make progress on organising shit it's back on the lathe.
Chakte Viga 14mm, the wood came from the US via @Timberhead and is off back in a couple of weeks.

Got a really nice black glass extract jar which deserved a better lid than the plastic it came with.
Chakte Viga and Bog Oak.


Parts arrived for the triple stem. 10 to do, let's see how well they sell. I think they look a little intimidating.



Way too much going on at the moment, loads of telephone conversations which feel very non productive but all for the greater good.

 

[phattpiggie]

Found a new background during the ongoing clear up.
These have to be black glass.

Unless.....

 

[phattpiggie]

The beginning of this year has been full on and it's not over with yet.
Lost hours on phone conversations and travel seem wasted time but it's all for the greater good.

Fly into Vegas tomorrow evening for Champs, get home and a fortnight later it's back out to Spannabis.

Thankfully there's been a bit of time to play with some more wood for the little concentrate jars.



Chakte, Bog Oak, Chatke, Olivewood then a Blackwood.

Also tried out a larger jar. Unfortunately the forstner bit is not leaving me much wiggle room so the tiny spots on the tops are where I've turned it down too much.
Not concerned about it just now and things are in the works to speed up making them and to ensure it doesn't happen again.

Got another triple stem finished this time in an alternative Jade and black acrylic.



Added a removable condenser with a 10mm fixed to it.

Filed up an Olivewood square as well.



Both pieces are off out to Champs.

Gone are the days of travelling light. As a toker it'd be skins, scissors or grinder and a lighter.

Minimum now is a stem, rayon and container to put it in, IH, spare battery, charger, dab tool and a back up torch.
Decided to leave the torch behind, after all I'll be in the company of a man who's probably got shares in them.

 

[momofthegoons]

You boys behave out there in Vegas without me there to monitor you. And cheer you on...

Jars look great phatts. And I really like that alternative Jade... really sharp looking.

 

[phattpiggie]

@momofthegoons we've agreed to be on our best behaviour, but you know. We ain't backwards in coming forwards.

Forgot to put this in the previous post.
Had a customer ask if this would be possible. Bought a Walnut grinder from the only place that had one over here, Poland, and tried it out.

The tip sits snug in the funnel so there is no way of any kief or fine powder going down the side of the VC. The funnel also fits nicely onto the grinder.

 

[phattpiggie]

More pics and stuff to come.
Great times in Vegas with great people. Many thanks to @VAPEHUNTER for the trip out.


For those who've asked about the clicks. SS tips

And for those who like to see shit working. 3 more heat cycles with no regard for the cool click.
Extracts on rayon. Turn the volume back down if you upped it for the clicks.

Compound slide eyed in to get the 1:10 taper. I really don't want to move it now it's cock on.

 

[phattpiggie]

Amboyna filed up nicely.

3 down....

 

[Stevenski]

What are you calling it Phatts? It needs a hard name like the Flatliner or something

 

[phattpiggie]

Cerberus seems to have stuck @Stevenski
From Wiki
'often referred to as the hound of Hades, a multi-headed dog that guards the gates of the Underworld to prevent the dead from leaving.'

 

[Stevenski]

Thats tough enough . Your three headed monster creates the zombies & couch lock does the rest!

 

[phattpiggie]

Covid 19 doesn't seem to be slowing up the amount of work to be done.
All 10 Triples now have twists. Condensers will be cut before they all get a final check and sand.
There's been a fair bit of interest in them and the recurring questions have been 'how much' and 'when will they be for sale'.
It's looking like they'll be up for auction through my IG account running blind bids through DM's. Not everyone likes auctions through the comments. I'll make sure and give plenty of notice.
I'm in no hurry due to the worries of international shipping so bear with me.

Oh and I make lids too

Got an order to put together for @VGOODIEZ along side a few other bits and bobs.

And I make these as well
Battle Scarred. Didn't know if this one was going to hold together or not but in for a penny and all that. I'm really itching to get finished. It's the biggest to be done so far, coke tin size, and I spent hours last night gorming off at it.

Zebrano which I think will be getting a Walnut base and comb.

Enjoy your Sunday as best you can.
Stay safe, stay indoors and disregard anything the Orange man says. Let him wait for the 'miracle' on his own.

 

[phattpiggie]

Can't edit this in, been a wee bit busy.
Walnut comb on Zebrano. Some lovely figure, now to dig through my stash for a nice piece for the base.

 

[phattpiggie]

Red Palm that came in a planed sheet. 3 pieces of it with the middle one perpendicular to the top and bottom sandwiching 2 pieces of black credit card.

 

[phattpiggie]

Turned Betel Nut a long time ago and thought it was about time it happened again.

The two darker ones will be cases to go with some Betel accent stems.
The lighter was for shits and..

The larger Blackwood was to see if the brass couplings would be any use for a stash. The ID is 12mm so it'd be fine for a VC. The extra diameter should mean it'll hold a reasonable amount of ground green.

 

[phattpiggie]

Still busy times over here, the worlds gone tits up but life goes on and shit don't get done unless you get stuck in.

There was a Crab Apple out front of the house that just stopped producing, it came down. The majority of it gets used for flavouring meat on the BBQ, but..
Thought it was about time that another helmet got done. They have to be the most satisfying pieces I've ever done.
Battled Scarred Crab Apple.

Got a larger Red Plam extract jar lid done, there will be more of these and I may have found a decent weed jar which will work.

Also an Olivewood stem with a few holes that ended up full of turquoise.

And a 14mm Olivewood

It's time to see how these sell, apologies if there is no sound. Copyright claims are inconsistent.




They go out for sale through a blind bid auction starting this Saturday, 11th April through until the 20th in alphabeticla order.
One stem a day with the auction running for 24 hours so every one no matter where on the big blue marble gets a chance to bid.
Bids through a PM and the highest bid wins. This keeps everything nice and private.
Not everyone likes to take part in a public auction or show what kind of diposable income they have. I.ve also found that some people would prefer to not to let their partners know the true extent of their dirty little habit.
I'm figuring the majority of sales will come via Instagram and this is where these auctions will primarily take place but I'm going to drop in here and check daily at the end of each day. Only fair the non IG users get a chance as well.
Feel free to ask me any questions if you need a better explanation. This is all very surreal but I figured rather than me work out a price I'd let everyone else.

Stay safe everyone.

 

[im not a robot]

these are totally nuts. comic book or contemporary art kind of bonkers. brilliant. history better treasure them. nice work @phattpiggie

 

[ataxian]

Still busy times over here, the worlds gone tits up but life goes on and shit don't get done unless you get stuck in.

There was a Crab Apple out front of the house that just stopped producing, it came down. The majority of it gets used for flavouring meat on the BBQ, but..
Thought it was about time that another helmet got done. They have to be the most satisfying pieces I've ever done.
Battled Scarred Crab Apple.

Got a larger Red Plam extract jar lid done, there will be more of these and I may have found a decent weed jar which will work.

Also an Olivewood stem with a few holes that ended up full of turquoise.

And a 14mm Olivewood

It's time to see how these sell, apologies if there is no sound. Copyright claims are inconsistent.




They go out for sale through a blind bid auction starting this Saturday, 11th April through until the 20th in alphabeticla order.
One stem a day with the auction running for 24 hours so every one no matter where on the big blue marble gets a chance to bid.
Bids through a PM and the highest bid wins. This keeps everything nice and private.
Not everyone likes to take part in a public auction or show what kind of diposable income they have. I.ve also found that some people would prefer to not to let their partners know the true extent of their dirty little habit.
I'm figuring the majority of sales will come via Instagram and this is where these auctions will primarily take place but I'm going to drop in here and check daily at the end of each day. Only fair the non IG users get a chance as well.
Feel free to ask me any questions if you need a better explanation. This is all very surreal but I figured rather than me work out a price I'd let everyone else.

Stay safe everyone.

Very decent!

 

[momofthegoons]

Battled Scarred Crab Apple.

You've made some amazing helmets.... but this one might just be my favorite. Love the 'scars.'

Got a larger Red Plam extract jar lid done, there will be more of these and I may have found a decent weed jar which will work.

This made me a little insane in the membrane... love it. Also love the lids made out of the Betel nut.

 

[ataxian]

You've made some amazing helmets.... but this one might just be my favorite. Love the 'scars.'


This made me a little insane in the membrane... love it. Also love the lids made out of the Betel nut.

I love the stem’s!