My
@710 coils package arrived today
Helped take the edge off a shitty day nicely
Actually wasted my day but in a good way too
In my pack that arrived in great time from the US - quicker then a package I am waiting for from both GH and Dnail that still have not arrived and were ordered a long time ago -
I got my 30mm axial coil, 30mm opaque QB, a tin of 6mm and a tin of 8mm Quartz pearls, 2 clips (great things), Pi bubble cap and a couple of lollies... :)
So my afternoon disappeared as the obligatory testing needed to be done
The Auber works great.... I first set it on 660 which tasted nice and gave a decent milk, then I tried 670 which gave big milking in QB and cap and a big hit, but maybe a little hot
Then I went 665 and chucked in the three 8mm pearls - these really did make a difference as I have read it is surprising, as I have read, this hit milked a lot and tasted great, strong too
I may try a bit lower with the pearls next time
The Pi cap and pearls are great with the opaque QB
good taste and vape production
If you leave the Pi cap on the QB when it cools down it gets tuck on the QB till you heat it up again - this is because it gets vape on it and it gets sticky on the edge of the QB where touches the cap
It is no issue just something to be aware of and do not try to force it off - if had to take off while cold for cleaning or something either leave off while QB hot - or use iso to melt the resin...
It is def a step up from the torch and QB/cap I was using - I used to get good taste and hits from these but the constant heat and better quality glass from Shane has made a noticeable upgrade
The constant heat from the 710 coil + auber is not only an improvement and more consistent way to dab the fact you can leave it on and it stays at temp is great
If you do blank out for too long though (a good while though so it will never kill a sesh) the auber turns off automatically
When it or you do turn it off the led stays on and says hot - and shows temp as cooling down until it has done so and then it turns off completely
I need to play some more and get the perfect temps etc for me
As dabs hit so hard it is a toasty testing program.....
I just q-tip/iso wiped after each dab and then torch the inside to burn off any leftover residue and black is usually gone
Thank you so much for the package Shane and I will def be making another purchase
I want a moodmat and a spare QB
Also how do you use the inserts do you heat them outside of the QB and coil? I saw a video you had with no coil at all
Or do you just put the inserts in and use it all as normal
Also what is the difference between the 8mm and 6mm pearls? How do they differ in use ?
Lastly what are some ppls suggestions for temps with the 30mm 710 setup - even better if you use an auber
Cheers to all and thank you heaps Shane - I want more of your goodies now.... and need more slug juice to use with it....This is the only problem with your gear - I will be using more bud to squish so I can use my 710 rig...lol
I have had no flower today at all.....testing purposes of course